The Starflex™ orthotic blank is a polyester resin, reinforced with glass fibre threads.

The advantage of this orthotic lies in its varying thickness, which gives it strength, flexibility and lightness. This results in a very high rate of patient tolerance and satisfaction.

Starflex product features

Available pre-cut to size and molded to approximate shape, thus saving time and avoiding wastage when using sheets.

Unbreakable, made from Fibre Glass Reinforced Resin which has been toxicologically tested and conforms even to the food industry requirements.

Differing thickness gives greatest support exactly where it is needed. The longitudinal arch is only 3.1 - 3.5mm thick and the (flexible) heel about 1.0mm.

When heated to 100 Degrees for 15 Seconds in an oven or in boiling water, they can be molded easily to suit. (Do NOT heat over 150 Deg.)

A heat gun can also be used for 20-40 seconds. If discolouration occurs this will not affect the performance.

Grinding and cutting is simple using an emery paper of Grit Size 60.

A 'posting' can be applied simply using any adhesive.

Suitable as the Base for a full insole, by using a Lining such as Poron, Leather, E.V.A. etc.

Sizes: 24 - 48 (Child 6 - Adult 12 UK)